Custom Printed Mesh Hanging Banners
Mesh Banners are used for outdoor events such as festivals, celebrations, and concerts. Printed on a polyester, they allow wind and sound to pass through the material. Mesh Banners permits some visibility through windows and also allows natural light into the store. Mesh Banners are suitable for situations where a banner will be subjected to high wind conditions. Since the material is more lightweight, the mesh is a viable alternative to vinyl to counteract the effect in windy conditions. If you are looking for large format banners to hide scaffolding on a construction job, or expect to subject your banner in heavy winds, Mesh Banners are the preferred choice.
Custom sizes are also available if you don’t see a perfect size listed here. Contact us to discuss!
Grommets: For our grommets, we use Silver Nickel Grommets Size #2 (3/4″ outside diameter) with a hole diameter of 3/8″
Standard Grommets: Silver grommets will be evenly placed along the edge of your banners on an average of every 2-3ft. (Ex. A banner 8′ X 4′ would have 4 grommets on top and 4 grommets on the bottom.)
4 Corners Grommets: Grommets are placed only on the 4 corners of the banner.
All Banners equal and smaller than 4ft x 2ft will only include grommets in the corners.
Custom pole pockets are also available and are made by folding an extra 3 inches of blank media towards the backside of the banner and sewing it together. Your artwork should include a “safety zone” of 3″, within your final size, along the sides that the pole pocket will be created. Avoid any important text or logos in this area. If you have a white background on your artwork please include a bounding box with a gray 1pt stroke.
For 8 feet (height) banners please be advised that the pole pockets will reduce your final size 6 inches due to the pocket fold. Pole pockets longer than 8 feet may include an extra charge of $5.00.
If you need a pole pocket for a pole thicker than 1″ please indicated in the Special Instructions Box at the time of uploading your artwork.
Instructions for Double-Sided Banners with Pole Pockets:
1. Measure the Height of the Base, if any, from the top of the upper pole to the bottom of the lower pole. (This Height will be your Final Size. This size)
2. Measure the thickness of the Pole.
3. After measuring the thickness of the pole, double that quantity and bleed out that measure on your artwork at the top and at the bottom.
4. The bleed out areas on your artwork will be folded backward to create the pole pocket. Please make sure the fold will not cover any important information in the other side within your final size. Your safety area will be the same measure as the Bleed measure.
5. If you have a different image on the back of your banner:
On the Front Side, in the Bleed out Section, flip your image horizontally and vertically to maintain a continuous artwork on your backside.
Pole Pocket Dimensions
1″, Bleed 3″
2″-9″ – 4.5
Pole Pocket’s Holding Grommets: Holding grommets refers to our sliver nickel grommets placed on the edges right were the pole pocket starts. These grommets improve the strength of the pole pocket for heavier rods or poles. This option also gives the banner the option to be hanged by the grommets when poles are not available.